Back to Blogs

Bricklaying Workflow Capture / ConsensusTAS (Zhou and Sun, 2026) / Nov 17, 2026

Stereo Egocentric Camera: Recording Bricklaying with R8

Use the R8 stereo egocentric camera to record mortar spreading, brick placement and course completion with synchronized images, IMU data and timestamps.

Bricklayer wearing an EGO R8 stereo egocentric camera on a black headband, with a cable routed to a waist pouch, steadying a red brick with one hand while using a trowel beside a fresh mortar bed on an unfinished wall
TINTELE GLOBAL CO., LIMITED original AI-generated masonry recording concept based on authentic EGO R8 product imagery

How can a stereo egocentric camera record a complete bricklaying course?

  • Follow the bricklayer from loading the trowel through mortar spreading, brick placement, seating and the final laying cycle.
  • Use R8 hardware-synchronized global-shutter stereo images with a selected 100, 200 or 500 Hz 6-axis IMU record and unified timestamps.
  • Have a reviewer index the visible masonry phases and brick order against the original recording timeline.

Explore EGO R8 stereo camera, synchronization and IMU specifications

An R8 stereo egocentric camera can record a bricklayer's view of mortar spreading, brick placement and the hand movements that join them into a completed course. This workflow follows the worker through a continuous masonry take. R8 supplies hardware-synchronized, global-shutter stereo images and a 6-axis IMU record on unified timestamps; the recording team keeps the sequence and writes its event notes.

Plan the take around the bricklaying sequence

Xiaoshan Zhou and Yafei Sun's ConsensusTAS research treats bricklaying as a sequence of smaller activities, including spreading mortar, placing a brick, pressing and aligning. That task-level distinction informs the capture plan here. The R8 setup records the work as performed, while a reviewer later chooses the phase names and marks the visible transitions.

Set the R8 view at the working wall

Before laying starts, fit the black R8 headband and check the actual working posture at the wall. Look toward the mortar board, the waiting brick and the top of the course. In both image streams, confirm that the brick-holding hand, trowel hand and next placement area remain visible during a short rehearsal. Repeat the check when the wall height changes.

Arrange the USB 2.0 connection and DC 5 V supply with the external capture host before starting the course. Route the cable behind the shoulder toward the selected waist-carried arrangement. Record the device identifier, acquisition settings and chosen IMU rate in a session note. Check that both camera streams reach the host before loading the trowel.

Record mortar spreading and the brick approach

Start with mortar on the trowel and retain the complete movement onto the brickwork. Record the passes that spread the bed, the small wrist turns that move material along the course and the return to the board for another load. Keep these preparation actions in the same take as the placement that follows, so the next brick has a visible lead-in.

As the worker picks up a brick, keep its journey from stack to wall in the recording. Include mortar applied to the brick end, the lowering onto the prepared bed and the moment the supporting hand releases it. R8's paired viewpoints preserve the scene from its two camera positions; a reviewer can follow which hand carries the brick and which guides the trowel.

Keep the two views synchronized during seating

The R8 cameras use a common hardware trigger or shutter signal. When a brick is being seated and the trowel starts to trim the joint, keep the corresponding left and right frames matched by their original timing. The global-shutter image pair records that step at a shared capture instant as the hands and tool change position.

Follow repeated laying cycles to course completion

Continue through the worker's checks along the course, the removal of excess mortar and the reach for another brick. Keep pauses to replenish mortar or move the brick stack in their performed order. A useful course-level recording shows how the repeated laying cycles connect, including the point where the worker finishes the row and puts the trowel aside.

Link the changing viewpoint to IMU samples

Choose 100, 200 or 500 Hz for the R8 6-axis IMU and save the selected rate with the take. Looking between the mortar board, brick stack and wall produces changes in the head-mounted viewpoint. The inertial samples accompany those movements, and unified timestamps let the recording team retrieve the camera frames and IMU interval belonging to the same part of the work.

Build a masonry event index from the recordings

During review, give each placed brick an ordinal within the course and mark the visible events: mortar reaches the bed, the brick enters the placement area, the hand seats it, the trowel clears the edge and the worker reaches for the next unit. These are reviewer-written labels. Use the R8 timing record to attach each note to its corresponding image pair and surrounding sequence.

Check the course and retain its capture files

After the last placement, review the first laying cycle, a middle cycle, a mortar refill and the finished end of the course. Keep the original paired images and IMU samples together with the session note. Associate applicable camera intrinsics, distortion coefficients and stereo extrinsics with the correct R8 unit and capture configuration. This preserves the recording context for a later masonry review.

What does R8 capture while a worker lays bricks?

For this bricklaying workflow, R8 captures two hardware-synchronized global-shutter views from the worker's headband and a timestamped 6-axis inertial stream. The images show the visible hands, trowel, mortar and brickwork; the IMU samples describe motion at the head-mounted device during the recorded task.

How can the mortar-to-brick sequence stay complete?

Keep recording across the mortar load, spreading pass, brick placement, seating movement and trowel return. An uninterrupted course-level take retains the links between successive bricks. The reviewer can then select shorter clips by their timestamped boundaries while keeping the complete sequence as the reference.

Who creates the bricklaying action labels?

The reviewer creates the masonry phase labels after checking the R8 stereo images. Preserve each label's time interval, course identifier and brick ordinal alongside the original camera and IMU records. This turns stereo egocentric camera footage into a searchable record of the demonstrated bricklaying process through human review.

Research reference and R8 specifications

Zhou and Sun: ConsensusTAS construction activity segmentation research (2026)

Explore EGO R8 stereo camera, synchronization and IMU specifications

stereo egocentric camerabricklaying workflowsynchronized stereo videoEGO R8
Explore more EGO field guidesDiscuss a camera data project